MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030/EVO2...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030/EVO2...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009H-1

Fittings for AL7075 HD Universal Shaft CVD

Fit to: MAP009H?

USD 3.1(In Stock)

MAP009H-OP1

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

Fit to: MAP009H?

3mm Outer Race --- 1 pair.
Allows user to make diameter that is fitting to various brands of bearings.

USD 10.0USD 15.0(In Stock)

MAU1044R

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

Chassis: Any chassis with DWS installed.
Wheelbase:
90mm and 94mm on MA-010, MA-015, MA-020.
94mm and 98mm on MA-030/EVO2, MA-03F.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

Fit with original accessories.

USD 15.6USD 24.8(In Stock)

MAU105C

Alum. alloy Rear Hub (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105R

Alum. alloy Rear Hub (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105U

Alum. alloy Rear Hub (For DWS, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU1065

DWS Rear Lower Arm Pin

Chassis: Any chassis with DWS installed.

2 pcs

USD 2.1(In Stock)

MAU106NC

Alum. alloy Rear Lower Arm (For DWS, Narrow, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106NR

Alum. alloy Rear Lower Arm (For DWS, Narrow, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106NU

Alum. alloy Rear Lower Arm (For DWS, Narrow, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106WC

Alum. alloy Rear Lower Arm (For DWS, Wide, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106WR

Alum. alloy Rear Lower Arm (For DWS, Wide, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106WU

Alum. alloy Rear Lower Arm (For DWS, Wide, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106-1

Fittings for Rear Lower Arm

Fit to: MAU106???

USD 4.0USD 6.7(In Stock)

MAU107E3C

Alum. alloy Upper Arm Holder (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.

Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030/EVO2, MA-03F.

CAUTION!
If you are using the DWS on the MA-030/EVO2, please click into detail page to read the instructions.

USD 26.7USD 40.7(In Stock)

MAU107E3R

Alum. alloy Upper Arm Holder (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.

Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030/EVO2, MA-03F.

CAUTION!
If you are using the DWS on the MA-030/EVO2, please click into detail page to read the instructions.

USD 26.7USD 40.7(In Stock)

MAU107E3U

Alum. alloy Upper Arm Holder (For DWS, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.

Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030/EVO2, MA-03F.

CAUTION!
If you are using the DWS on the MA-030/EVO2, please click into detail page to read the instructions.

USD 26.7USD 40.7(In Stock)

MAU107-OP1

Long Linker for Upper Arm Holder

Fit to: MAU107???

Change Alum. alloy Upper Arm Holder to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07).

USD 3.4USD 4.17(In Stock)

MAU107-1

Adjustment Wrench for Upper Arm Holder

Fit to: MAU107???

USD 2.4USD 3.3(In Stock)

MAU1005

Alum. alloy Threaded Spacer Set (For DWS Upper Rod)

Chassis: Any chassis with DWS installed.

Internal thread design, more convenient to use, reduce the chance of falling and losing. And true to the original...

USD 6.0USD 7.5(In Stock)

MAU1008C

Alum. alloy Shock Ball / Bead (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

High precision smooth surface, prompting the action more smoothly...

USD 6.3USD 8.3(In Stock)

MAU1008R

Alum. alloy Shock Ball / Bead (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

High precision smooth surface, prompting the action more smoothly...

USD 6.3USD 8.3(In Stock)