MAP052NR

Alum. alloy Front Lower Wishbone Set (MA-020, Narrow, Red)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052NU

Alum. alloy Front Lower Wishbone Set (MA-020, Narrow, Gunmetal)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052WC

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Cyan)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP052WR

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Red)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP052WU

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Gunmetal)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053NC

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Cyan)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053NR

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Red)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP053NU

Alum. alloy Front Lower Wishbone Set (MA-030/F, Narrow, Gunmetal)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053WC

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Cyan)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053WR

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Red)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP053WU

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Gunmetal)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)

MAP053-1

Fittings for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 3.0USD 4.5(In Stock)

MAP053-2

Shaft Pin for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 2.0USD 2.6(In Stock)

MAP036C

Alum. alloy Motor Mount Set (MA-030/F, Cyan)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036C-1

Fittings for Motor Mount Set (Bracket & Holder, Cyan)

Fit to: MAP036C

USD 18.1(In Stock)

MAP036C-2

Fittings for Motor Mount Set (Chassis Brace, Cyan)

Fit to: MAP036C

USD 13.8(In Stock)

MAP036R

Alum. alloy Motor Mount Set (MA-030/F, Red)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036R-1

Fittings for Motor Mount Set (Bracket & Holder, Red)

Fit to: MAP036R

USD 18.1(In Stock)

MAP036R-2

Fittings for Motor Mount Set (Chassis Brace, Red)

Fit to: MAP036R

USD 13.8(In Stock)

MAP036U

Alum. alloy Motor Mount Set (MA-030/F, Gunmetal)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036U-1

Fittings for Motor Mount Set (Bracket & Holder, Gunmetal)

Fit to: MAP036U

USD 18.1(In Stock)

MAP036U-2

Fittings for Motor Mount Set (Chassis Brace, Gunmetal)

Fit to: MAP036U

USD 13.8(In Stock)

MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)