MAP001V2C

Alum. alloy Front Upper Arm Set Ver.2 (Cyan)

Chassis: MA-020, MA-030, MA-03F

Easy to adjust the chassis ground clearance, and limit suspension travel...

USD 26.2USD 40.8(In Stock)

MAP001V2R

Alum. alloy Front Upper Arm Set Ver.2 (Red)

Chassis: MA-020, MA-030, MA-03F

Easy to adjust the chassis ground clearance, and limit suspension travel...

USD 26.2USD 40.8(In Stock)

MAP001V2U

Alum. alloy Front Upper Arm Set Ver.2 (Gunmetal)

Chassis: MA-020, MA-030, MA-03F

Easy to adjust the chassis ground clearance, and limit suspension travel...

USD 26.2USD 40.8(In Stock)

MAP001-1

Fittings for Front Upper Arm Set (Stable spring base)

Fit to: MAP001???

USD 6.2USD 7.5(In Stock)

MAP001-2

Fittings for Front Upper Arm Set (Spring Base & Screws)

Fit to: MAP001???

USD 3.5USD 5.0(In Stock)

MAP002V2

Stainless-Steel Front Upper Suspension Shaft

Chassis: MA-020, MA-030, MA-03F

Inheriting the excellent bolt thread design eliminates the trouble of C-clips dropping...

USD 3.6USD 5.6(In Stock)

MAP003NC

Alum. alloy Front Upper Cover (MA-020, Narrow, Cyan)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(In Stock)

MAP003NR

Alum. alloy Front Upper Cover (MA-020, Narrow, Red)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(In Stock)

MAP003NU

Alum. alloy Front Upper Cover (MA-020, Narrow, Gunmetal)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(In Stock)

MAP003WC

Alum. alloy Front Upper Cover (MA-020, Wide, Cyan)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(In Stock)

MAP003WR

Alum. alloy Front Upper Cover (MA-020, Wide, Red)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(In Stock)

MAP003WU

Alum. alloy Front Upper Cover (MA-020, Wide, Gunmetal)

Chassis: MA-020

Make front upper portion stronger. Reduce the problem of it's often deformation.

USD 20.8USD 32.5(Low Stock)

MAP00410C

Alum. alloy Front Knuckle (1 degree camber, Cyan)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00410R

Alum. alloy Front Knuckle (1 degree camber, Red)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00410U

Alum. alloy Front Knuckle (1 degree camber, Gunmetal)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420C

Alum. alloy Front Knuckle (2 degree camber, Cyan)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420R

Alum. alloy Front Knuckle (2 degree camber, Red)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP00420U

Alum. alloy Front Knuckle (2 degree camber, Gunmetal)

Chassis: MA-020, MA-030, MA-03F

The increased toe angle allows for a more extreme setup. If additional angles are not required, we recommend the "+" angle tie rod in the KYOSHO parts kit.
More detail for MA-020: https://rc.kyosho.com/en/mdw203b.html
More detail for MA-030/F: https://rc.kyosho.com/en/mdw303.html

Compatible with KYOSHO lower plastic plate and MPower Alum. alloy Front Lower Wishbone Set.

USD 21.2USD 35.5(In Stock)

MAP004-1

Fittings for Front Knuckle (MA-020,030/F)

Fit to: MAP004???

USD 2.3USD 3.5(In Stock)

SH-003

Alum. alloy Shim Set 3×4(TH0.5/1.0)mm

ID3×OD4×TH0.5(mm) --- 5pcs
ID3×OD4×TH1.0(mm) --- 5pcs

USD 5.0(In Stock)

MAP052NC

Alum. alloy Front Lower Wishbone Set (MA-020, Narrow, Cyan)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052NR

Alum. alloy Front Lower Wishbone Set (MA-020, Narrow, Red)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052NU

Alum. alloy Front Lower Wishbone Set (MA-020, Narrow, Gunmetal)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP052WC

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Cyan)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(Low Stock)