Standard M2×P0.4 thread.

Tapping tips:
First drill a 1.6mm diameter hole at the position to be tapped. Then tap the thread.
If encounter a hole that is difficult to tap (such as a hard material), please tap a few threads and then back a little and then continue to tap, repeatedly and slowly to complete it. If necessary, you can apply lubricant to the hole being tapped.

M2×P0.4 Tapping Driver --- 1 pc

Thread Tap Driver (M2×0.4)

  • Product No.: TOLTP-M2
  • Availability: In Stock
  • USD 7.5USD 9.6


Thread Tap Drill Bit (M2×0.4)

Standard M2×P0.4 thread.

(For Thread Tap Driver (M2×0.4))

USD 2.0USD 2.6(In Stock)