-1920x1280.jpg "Alum. alloy Upper Arm Holder (For DWS, Red)")
-1920x1280.jpg "Alum. alloy Upper Arm Holder (For DWS, Red)")
Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.
Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030, MA-03F.
CAUTION!
If you are using the DWS on the MA-030, please take note of the following instructions:
Based on original design by KYOSHO, the 90mm wheelbase is not compatible with DWS.
Additionally, there is a risk of damaging the mainboard with the 94mm wheelbase. If you intend to use DWS with the 94mm wheelbase, it is recommended to manually modify the chassis to move the mainboard forward.
98mm or longer wheelbase are no problem.
Upper Arm Holder --- 1 pc
Fine-tuning tool --- 1 pc
Screw (M2×10mm) --- 2 pcs
Self-tapping screw (2×10mm) --- 2 pcs
Alum. alloy Upper Arm Holder (For DWS, Red)
- Product No.: MAU107E3R
- Availability: In Stock
- USD 26.7USD 40.7
Related Products
-900x600.jpg "Alum. alloy Upper Arm Holder (For DWS, Cyan)")
Alum. alloy Upper Arm Holder (For DWS, Cyan)
Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.
Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030, MA-03F.
CAUTION!
If you are using the DWS on the MA-030, please click into detail page to read the instructions.
USD 26.7USD 40.7(In Stock)
-900x600.jpg "Alum. alloy Upper Arm Holder (For DWS, Gunmetal)")
Alum. alloy Upper Arm Holder (For DWS, Gunmetal)
Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.
If you want to change to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07), you need Long Linker.
Stepless fine tuning for camber angle.
Strengthen the fixed.
Compatible with MA-020, MA-030, MA-03F.
CAUTION!
If you are using the DWS on the MA-030, please click into detail page to read the instructions.
USD 26.7USD 40.7(In Stock)
-900x600.jpg "Long Linker for Upper Arm Holder")
Long Linker for Upper Arm Holder
Fit to: MAU107???
Change Alum. alloy Upper Arm Holder to wide setting without KYOSHO Rear Long Sus.Arm Set (MDW100-07).
USD 3.4USD 4.17(In Stock)
-900x600.jpg "Adjustment Wrench for Upper Arm Holder")