MA-030/F parts (AWD,FWD)

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Red)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP053WU

Alum. alloy Front Lower Wishbone Set (MA-030/F, Wide, Gunmetal)

Chassis: MA-030, MA-03F

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

USD 32.6USD 46.8(In Stock)

MAP053-1

Fittings for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 3.0USD 4.5(In Stock)

MAP053-2

Shaft Pin for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

USD 2.0USD 2.6(In Stock)

MAP036C

Alum. alloy Motor Mount Set (MA-030/F, Cyan)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036C-1

Fittings for Motor Mount Set (Bracket & Holder, Cyan)

Fit to: MAP036C

USD 18.1(In Stock)

MAP036C-2

Fittings for Motor Mount Set (Chassis Brace, Cyan)

Fit to: MAP036C

USD 13.8(In Stock)

MAP036R

Alum. alloy Motor Mount Set (MA-030/F, Red)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036R-1

Fittings for Motor Mount Set (Bracket & Holder, Red)

Fit to: MAP036R

USD 18.1(In Stock)

MAP036R-2

Fittings for Motor Mount Set (Chassis Brace, Red)

Fit to: MAP036R

USD 13.8(In Stock)

MAP036U

Alum. alloy Motor Mount Set (MA-030/F, Gunmetal)

Chassis: MA-030, MA-03F

Reduce interference with the body, allowing more bodys to be used.

Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.

Dedicated brace set included.

USD 43.6USD 58.4(In Stock)

MAP036U-1

Fittings for Motor Mount Set (Bracket & Holder, Gunmetal)

Fit to: MAP036U

USD 18.1(In Stock)

MAP036U-2

Fittings for Motor Mount Set (Chassis Brace, Gunmetal)

Fit to: MAP036U

USD 13.8(In Stock)

MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

USD 16.0USD 25.3(In Stock)

MAP009H-OP1

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

Fit to: MAP009H?

3mm Outer Race --- 1 pair.
Allows user to make diameter that is fitting to various brands of bearings.

USD 10.0USD 15.0(In Stock)

MAU1044C

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Cyan)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Out of Stock)
(Tentative arrival in Q3.)

MAU1044R

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(In Stock)

MAU1044U

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Gunmetal)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

USD 15.6USD 24.8(Out of Stock)
(Tentative arrival in Q3.)

MAU105C

Alum. alloy Rear Hub (For DWS, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105R

Alum. alloy Rear Hub (For DWS, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU105U

Alum. alloy Rear Hub (For DWS, Gunmetal)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

USD 15.6USD 20.8(In Stock)

MAU106NC

Alum. alloy Rear Lower Arm (For DWS, Narrow, Cyan)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)

MAU106NR

Alum. alloy Rear Lower Arm (For DWS, Narrow, Red)

Chassis: Any chassis with DWS installed.
NOTE! Your car must have KYOSHO DWS before it can be modified with this part.

An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub...

USD 21.9USD 33.7(In Stock)