MA-020 parts (AWD)




Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Gunmetal)

MAP052WU

Alum. alloy Front Lower Wishbone Set (MA-020, Wide, Gunmetal)

Chassis: MA-020

Simply upgrade to a front double wishbone system based original parts. Better dynamic camber make stability in corners. Down stop and chassis height settings can be setup.

*The assembly of this component requires tapping. Click this link to see when it will be used.
Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2)

$32.6$46.8(In Stock)

Fittings for Front Lower Wishbone Set (MA-020,030/F)

MAP053-1

Fittings for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

$3.0$4.5(In Stock)

Shaft Pin for Front Lower Wishbone Set (MA-020,030/F)

MAP053-2

Shaft Pin for Front Lower Wishbone Set (MA-020,030/F)

Fit to: MAP052??, MAP053??

$2.0$2.6(In Stock)

Fittings for Front Lower Arm Ver.2

MAP005-1

Fittings for Front Lower Arm Ver.2

Fit to: MAP005V2???

$3.0$4.2(In Stock)

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

MAP009HN

AL7075 HD Hard Coated Universal Shaft / CVD (Narrow, 1 pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

$16.0$25.3(In Stock)

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

MAP009HW

AL7075 HD Hard Coated Universal Shaft / CVD (Wide, 1pair)

Chassis: AWD family (MA-010, MA-015, MA-020, MA-030...etc.) and MA-03F

Inherit the excellent design of the original and improved. Hard coated, more wear-resistant. Smaller joint diameter, volume and lighter. Higher precision.
The User-customized Outer Race option allows user to make diameter...

$16.0$25.3(In Stock)

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

MAP009H-OP1

User-customize Outer Race for HD Hard Coated Universal Shaft / CVD (1pair)

Fit to: MAP009H?

3mm Outer Race --- 1 pair.
Allows user to make diameter that is fitting to various brands of bearings.

$10.0$15.0(In Stock)

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Cyan)

MAU1044C

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Cyan)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

$15.6$24.8(In Stock)

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

MAU1044R

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Red)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

$15.6$24.8(In Stock)

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Gunmetal)

MAU1044U

Alum. alloy Rear Chassis Mounts (For DWS, Standard, Gunmetal)

Chassis: Any chassis with DWS installed.
(90mm and 94mm wheelbase on MA-010, MA-015 and MA-020. 94mm and 98mm wheelbase on MA-030 and MA-03F.)

Good match with original accessories.

On the premise of being as lightweight as possible, achieve a flat bottom surface.

$15.6$24.8(In Stock)

Alum. alloy Rear Hub (For DWS, Cyan)

MAU105C

Alum. alloy Rear Hub (For DWS, Cyan)

Chassis: Any chassis with DWS installed.

Good match with original accessories.

The design of increasing the radian can reduce the interference to the cardan shaft.

$13.4$20.8(In Stock)

Alum. alloy Rear Hub (For DWS, Red)

MAU105R

Alum. alloy Rear Hub (For DWS, Red)

Chassis: Any chassis with DWS installed.

Good match with original accessories.

Increase the radian design to reduce the interference with the universal shaft.

$13.4$20.8(In Stock)

Showing 25 to 36 of 60 (5 Pages)