6 pcs..

Chassis: MX-01This adapter can be stacked with Offset Spacer [MXP008]. (Adapter contains 1mm offset.)*If stacked, must to use longer screw. (This Screws Set [S22PUS001] package include: 8mm, 10mm, 12mm, 14mm, 16mm screws.)*Reference for screw matching: Offset +2 uses with 12mm screws. Offset +4 uses with 14mm screws. Offset +6 uses with 16mm screws.NOTE:1. This part is tightly connected with the KYOSHO plastic universal joint. If your universal joint is made of KYOSHO metal or other brands, this adapter may need to be sanded to assemble well with the counterpart. Persons using this part must have the ability to modify.2. Due to the wide width of the monster wheel, the tire will collide with the wheel-arch when the shock absorber is compressed. The person using this part must have the ability to raise the shell or any other modification. (The way to increase the offset is also a solution.)..

Angled with camber. Compatible multiple brand rims for easy install...

2mm-14mm bearing inner size measurer.It can be used as a simple disassembly/assembly tool.The flat surface prevents random rolling when placed on a desktop...

6 pcs..

Chassis: Any chassis with DWS installed.NOTE! Your car must have KYOSHO DWS before it can be modified with this part.For detailed purchasing instructions, please refer to the DWS Parts Buying Guide ↗.An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub. (Such as original plastic Rear Hub and R246 aluminum alloy Rear Hub.)More stronger lower arm, make the actions clearly. Reduce the problem of deformation...

5 pcs...

Chassis: MA-030/EVO2, MA-03FThe separate design is conducive to the convenience of changing gear ratios.Compatible with original plastic arm and MPower-Pro Alum. alloy Arm.Make front upper portion stronger. Reduce the problem of it's often deformation...

Chassis: Any chassis with DWS installed.NOTE! Your car must have KYOSHO DWS before it can be modified with this part.For detailed purchasing instructions, please refer to the DWS Parts Buying Guide ↗.An extra pair of special-sized shaft pins for user-customize to solve the problem of different inner diameters of different brands of Rear Hub. (Such as original plastic Rear Hub and R246 aluminum alloy Rear Hub.)More stronger lower arm, make the actions clearly. Reduce the problem of deformation...

Chassis: MA-020Simply upgrade to a front double wishbone system based original parts.Better dynamic camber make stability in corners.Down stop and chassis height settings can be setup.*The assembly of this component requires tapping. Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2) (You can refer to the assembly instructions in the last picture to know when it will be used.)..

Fit to: MRP100?..

Chassis: MA-020Simply upgrade to a front double wishbone system based original parts.Better dynamic camber make stability in corners.Down stop and chassis height settings can be setup.*The assembly of this component requires tapping. Recommended hand tools: M2×0.4 Thread Tap Driver (TOLTP-M2) (You can refer to the assembly instructions in the last picture to know when it will be used.)..

Mainboard: EVO2The wire is thin and has moderate hardness and is easy to bend to shape and arrange the wiring.Three colors are available to match the KYOSHO motor...

Chassis: Any chassis with DWS installed.With this small part and the Stainless-Steel Rear Lower Arm Pin (MAU1065), there is no longer any need to purchase the original MDW100-05 just for the pin and pivot ball when performing a full DWS modification...

Chassis: MA-020Make front upper portion stronger.Reduce the problem of it's often deformation...

Chassis: MA-030/EVO2, MA-03FReduce interference with the body, allowing more bodys to be used.Supports motors for Mini-Z from almost all brands, including those with screw holes for fixing and those without.Dedicated brace set included...

Chassis: RWD (MR-03/MR-04)(For RWD (MR-03/MR-04) front springs to fine-tune front ride height.)ID3.4 × OD4.6 × H0.2 mm --- 8pcs..

Chassis: MA-020, MA-030/EVO2, MA-03FEasy to adjust the chassis ground clearance, and limit suspension travel.Make front upper arm stronger.Compatible with the thread edition shaft...